<meter id="hh1nh"></meter>
<th id="hh1nh"><em id="hh1nh"><delect id="hh1nh"></delect></em></th>

        <form id="hh1nh"></form>

          <listing id="hh1nh"><nobr id="hh1nh"></nobr></listing>
          <nobr id="hh1nh"></nobr>

            <th id="hh1nh"><form id="hh1nh"><font id="hh1nh"></font></form></th>
            <rp id="hh1nh"><progress id="hh1nh"></progress></rp>

            Petroleum Engineering Lab Center

            Dr. Zhao Haifeng
             
            Education
            Masters from  Institute of mechanics ,Chinese academy of science.(China)
            Bachelor from Peking University.(China)
             
            Research(Areas of Research Focus)
             Volume fracturing in tight sand oil/gas and shale gas.
            CBM fracturing.
             Mechanics and chemistry of wellbore stability.
             Prediction and prevention of sand production.
             Solid mechanics and finite element techonology.
             Management of reaserch laboratories.
             
            Teaching
             Computational solid mechanics
             Ocean engineering fluid mechanics and structural dynamic reponse
             
            Previous Teaching
            2007-Now China university of petroleum(Beijing)
             
            Other Functions
             Editor board member ofMine Engineering
            Reviwer ofJournal of Petroleum Science and Engineering, Measurementand International Journal of Rock Mechanics and Mining Sciences.
             
            Professional Affiliation
             Chinese Society of Theoretical and Applied Mechanics
            International Society of Rock Mechanics
             
            Contact
             Email:zhaohf@cup.edu.cn
             Tel:13401095932
             Fax:
             Address of Office: No.18 Fuxue road, mailbox 289, Changping disdrict, Beijing.
             
            Publications
             [1]Determination of interfacial properties between metal film and ceramic substrate with an adhesive layer, Materials & Design, 2009
             [2]Experiment and finite element model for optimizing pressure difference of hydraulic fracture well test, Petroleum Exploration and Development,2009
             [3]Extending behavior of hydraulic fracture on formation interface, Acta Petrolei Sinica, 2009
             [4] Determination of interface properties between micron-thick metal film and ceramic substrate, Engineering Mechanics,2009
            [5] Inverse analysis from actual data to determine geostress and wellbore stability, Chinese Journal of Rock Mechanics and Engineering,2010
            [6] Extending mechanics of hydraulic fracture when reaching formation interface, Journal of Petroleum Science and Engineering,2010
            [7] Salt loading on casing in cased wellbore sections, Iternational Journal of Rock Mechanics and Mining Sciences,2011
            [8] Real-time prediction of borehole instability based on actual drilling data, Acta Petrolei Sinica,2011.
            [9] Discrete element model for coal wellbore stability,Iternational Journal of Rock Mechanics and Mining Sciences,2012
             [10]Rock fracture kinetics of the fracture mesh system in shale gas reservoirs, Petroleum Exploration and Development(Chinese Edition),2012
             [11] Rock fracture kinetics of the fracture mesh system in shale gas reservoirs, Petroleum Exploration and Development(English Edition),2013
             [12]New insight into mechanisms of fracture network generation in shale gas reservoir ,Journal of Petroleum Science and Engineering,2013
             [13] Interpreting method of the earth stress by incomplete fractured curve, Petroleum Geology and Oilfield Development in Daqing,2015
             [14] Scale Model of Stress Sensitivity for Fractured Low-Permeability Reservoirs, PROCEEDINGS,Thirty-Ninth Workshop on Geothermal Reservoir Engineering,Stanford University, Stanford, California, January 26-28, 2015
            Patents
             [1] The method based on Structure analysis model to confirm Coal seam safe drilling fluid density.201110129742.0,2013.12.
             [2] A method to confirm Technological parameter of Sand prevention in sandstone and mudstone thin interbed fracturing.201110385585.X,2013.12.
             [3] A method to confirm Hydraulic fracturing displacement of Shale gas reservoir.201110421993.6.
             [4] A method to confirm stress sensitivity of Fractured low permeability reservoir based on Subgrid Scale Model.201210213535.8
             [5] A software to evaluate rock mechanics parameters of low permeability reservoir.201SR009970.Date20120215.
             [6]A software to predict the wellbore stability while drilling. 2012SR044336.Date20120528.
             [7] A software to predict seepage of complex structural well in the stress sensitivity and low permeable reservoir.2012SR101983,Date20121039.
            Programs
             [1] The reaserch on rock fracture dynamics of map cracking system in shale gas reservoil(KYJJ2012-02-41).2012.6-2014.12
             [2] The discharge rule and the optimal discharge well type design approach based on Fluid-structure interaction(2011ZX05009-005-01B).2011.1-2015.12
             [3] Synchronous fracturing mechanism of multi-well and multi-fracture in unltra-low permeable shale(51074771).2011.1-2015.12.
             [4] The rock mechanics of shale gas exploitation(51234006).2013.1-2016.12.
             [5] The mechanism of leakage plugging in deep sensitive stress layer(51204095).2013.1-2015.12.
             [6] The steam drive numerical simulation in low-lying area 38 piece of east three sections.2013.09-2013.12
             [7] The mechanism of tight sandstone reservoir fracturing and process planning.2013.09-2013.12
             [8] The coal sample model process of high coal rank coal sample and coal triaxials’dynamic fracture.2013.09-2013.12
            99亚洲综合精品