個人簡歷
姓名:何楊燁
性別:女
職稱:副教授
導師類別:碩導
所在系所:安全工程系
Email:yangyehe@cup.edu.cn
辦公室:北校區新綜合樓A座504
個人簡介
何楊燁,理學博士,副教授,碩士生導師。博士畢業于巴西里約熱內盧聯邦大學工程研究生院(COPPE/UFRJ)海洋工程系,長期從事深水和超深水動態復合柔性立管局部力學和非線性動力學基礎理論和應用基礎研究,參與和主持大型國際深水柔性立管工程研發項目、國家重點實驗室開放基金立管項目、校優秀青年學者基金等基礎科研項目及其他橫向技術服務項目,以第一作者在海洋工程領域《Marine Structures》《Ocean Engineering》等知名期刊和海洋極地工程論壇等行業高水平國際會議發表學術論文20余篇,擔任科學出版社《水下作業與裝備》編委和《中國海上油氣》青年編委。2022年入選中國石油大學(北京)“優秀青年學者”、北京市科協2023-2025年度青年人才托舉工程。
主要研究方向:1、深水立管系統設計,海洋管線完整性管理及工程應用軟件開發;2、碳纖維增強熱塑性管(Thermoplastic Composite Pipe)的力學行為、失效分析及可靠性。
教育及工作經歷
2022.09-至今,中國石油大學(北京),海洋油氣工程系,副教授;
2022.05-2022.07,中海油和中石油國際巴西公司研發顧問(協調前期立項工作);
2021.04-2022.05,Institution Sintef do Brasil (ISDB) – FlowTech,研發工程師;
2019.11-2021.10,巴西里約熱內盧聯邦大學,海洋工程系,博士后;
2015.09-2019.10,巴西里約熱內盧聯邦大學,海洋工程系,理學博士;
2012.09-2015.06,中國石油大學(北京),機械工程系,工學碩士;
2008.09-2012.06,長江大學,機械設計制造及其自動化系,工學學士。
教授課程
本科生課程:助教《海洋結構振動》、《材料力學》。
代表性論文
Y. He*, M. Vaz, M. Caire, M. Duan, J. Su, Transient thermomechanical axisymmetric analysis of multilayer thermoplastic composite pipes, Applied Mathematical Modelling, 2023, 124: 257-278. (SCI, IF: 5)
Y. He*, M. Vaz, M. Caire, Thermoplastic composite pipe failure envelopes under axisymmetric and thermomechanical loading, Engineering Structures, 2023, 278:115499. (SCI, IF: 5.582)
Y. He*, M. Caire, I. Hernandez, M. Vaz, Bend stiffener material estimation in full-scale bending-tension tests considering various loading conditions, Journal of the Brazilian Society of Mechanical Sciences and Engineering, v 44, 2022. (SCI, IF:2.361)
Y. He*, M. Duan and J. Su, Bending of rectangular orthotropic plates with rotationally restrained and free edges: Generalized integral transform solutions, Engineering Structures, v 247, 2021. (SCI, IF: 5.582)
Y. He*, M. Vaz, M. Caire, Stress and failure analyses of thermoplastic composite pipes subjected to torsion and thermomechanical loading, Marine Structures, v 79, 2021. (SCI, IF: 4.5)
Y. He, I. Hernandez, M. Vaz*, M. Caire, Estimation of flexible riser curvature distribution and bend stiffener polyurethane behavior using the Levenberg-Marquardt algorithm in full scale bending-tension tests, Ocean Engineering, v 216, 2020. (SCI,IF: 4.372)
Y. He, M. Vaz*, M. Caire, Flexible riser-bend stiffener top connection analytical model with I-tube, Marine Structures, v 71,2020. (SCI, IF: 4.5)
Y. He*, C. An and J. Su, Generalized integral transform solution for free vibration of orthotropic rectangular plates with free edges, Journal of the Brazilian Society of Mechanical Sciences and Engineering, v 42, 2020. (SCI, IF: 2.361)
Y. He, C. An and J. Su*, Bending of orthotropic rectangular thin plates with two opposite edges clamped, Part C: Journal of Mechanical Engineering Science, v 234, 2019. (SCI, IF: 1.758)
Y. He, M. Vaz*, M. Caire, An inverse problem methodology for multiple parameter estimation in bend stiffeners, Applied Ocean Research, v 83, 2019. (SCI, IF: 3.761)
Y. He, M. Vaz, M. Caire, An inverse problem for parameter estimation in a bend stiffener system. In: 37th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2018-78180, Madrid, Spain.
Y. He, H. Lu, M. Vaz, M. Caire, Flexible riser top connection analysis with I-tube interface and bending hysteresis effect. In: 38th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2019-95826, Glasgow, Scotland.
何楊燁*,譚健,韓元明,袁坤,劉軍鵬,安峰辰, 海洋纖維增強熱塑性立管極限承載拉力預測方法, 海洋工程, 2023-07-24.
科研項目
2023.06-2025.12,基于非線性隨機振動的海洋鉆井隔水管疲勞壽命估計研究,中海油國家能源深水油氣工程技術研發中心重點實驗室開放基金,主持項目;
2023.03-2025.12,纖維增強熱塑性管在軸對稱荷載下極限承載研究,?;?優秀青年學者,中國石油大學(北京),主持項目;
2023.01-2025.12,非金屬智能復合連續管設計分析理論研究,北京市科協青年人才托舉工程,主持項目;
2022.01-2025.12,考慮殘余應力的柔性立管復合抗拉鎧裝線強度失效機制,國家自然科學基金委員會面上項目,參與項目;
2021.04-2022.05,深水立管海管流固耦合問題及軟件開發,挪威國油巴西公司,負責項目;
2017.09-2021.06,海洋柔性管線的壽命延長和完整性管理,殼牌巴西及巴西工業研究與創新公司,主研項目;
2017.01-2018.01,全尺寸柔性立管接頭拉伸彎曲試驗,TechnipFMC巴西公司,參與項目。
主要學術團體兼職
Marine Structures, Ocean Engineering, Applied Ocean Research, Ships and Offshore Structures以及Mathematical Problems in Engineering等 SCI期刊審稿人;國際海洋工程會議OMAE論文審稿人;科學出版社《水下作業與裝備叢書》編委和《中國海上油氣》青年編委;第12屆國際水下技術學會(SUT)技術會議組織委員會委員、第4屆復雜油氣工程科技創新論壇組織委員。
致報考學生:為學生提供專業、國際化平臺,致力培養一流的海洋工程裝備方向科技工作者!